FUN 32 Metric Series

A pair of flange profile rings separated by a 32 mm ball set; a constant section height of 90 mm and a standard range of external diameters ranging from 1100 mm to 1600 mm

All QCB® slewing rings are manufactured to the highest possible quality levels in ISO certified factories. A QCB® Quality Standard defines all aspects of their dimensions and tolerances as well as all aspects of manufacturing from materials properties, all stages of production, as well as packing and labelling.

Whilst the data on the site is updated regularly, we reserve the right to implement subtle changes to these standards in our quest for continual product improvement.

Applications

Typically used in large conveyor systems or ship loaders where the full strength of a solid section, large diameter slewing ring is unnecessary.

Need help?

Our technical team have many years of experience and are happy to assist with selection. Call or e-mail them for fast, efficient and professional advice.

The Design Form will assist you in defining your application details.

FUN32_xsection_dimensioned.jpg
QCB ReferenceOutline dimensions & weight
DaBUCDDiLoad curveWeight
mmmmmmmmmmmmkg
FUN 1100 32 00 CC LM110010179559558938058131
FUN 1200 32 00 CC LM12001117105510559939059145
FUN 1300 32 00 CC LM13001217115511551093100510159
FUN 1400 32 00 CC LM14001317125512551193110511172
FUN 1500 32 00 CC LM15001417135513551293120512186
FUN 1600 32 00 CC LM16001517145514551393130513200
Larger sizes to 2000mm by special offer only
QCB ReferenceOuter holesInner holes
LanaLini
mm mm
FUN 1100 32 00 CC LM10603084530
FUN 1200 32 00 CC LM11603094530
FUN 1300 32 00 CC LM126036104536
FUN 1400 32 00 CC LM136042114542
FUN 1500 32 00 CC LM146042124542
FUN 1600 32 00 CC LM156048134548
Larger sizes to 2000mm by special offer only
Standard grease fitting# at least 4-6x M8 on inner and outer rings

Interchange information

The FUN32 series is interchangeable with bearings from other manufacturers such as Roth Erde, Torriani Gianni, INA, Schaeffler, SKF, RKS, RIMA, La Leonessa and many more. However there may be variations to this rule (e.g. OEM variants) and we invite you to refer to our technical staff for assistance.

FUN 1100 32 00 AASD 1100 32 00 C110/1100.0280.30.0900.013183.30.0955.00.00.10
FUN 1200 32 00 AASD 1200 32 00 C110/1200.0280.30.1000.013183.30.1055.00.00.10
FUN 1300 32 00 AASD 1300 32 00 C110/1300.0280.30.1100.013183.30.1155.00.00.10
FUN 1400 32 00 AASD 1400 32 00 C110/1400.0280.30.1200.013183.30.1255.00.00.10
FUN 1500 32 00 AASD 1500 32 00 C110/1500.0280.30.1300.013183.30.1355.00.00.10
FUN 1600 32 00 AASD 1600 32 00 C110/1600.0280.30.1400.013183.30.1455.00.00.10


Custom designs

  • Double drilled or custom drilling patterns
  • Higher precision bearings with location diameters
  • Reduced internal clearance (Class 5 & Class 6)
  • Black oxide or zinc plating for enhanced corrosion protection
  • Epoxy paint or even Nylon coated units to special order
  • Stainless steel or aluminium versions

Materials

From 2015 all FUN32 Metric Series slewing rings >1000mm outer diameter will be manufactured in 42CrMo4 steel.


Internal construction

Standard FUN32 Series bearings incorporate plastic spacers, but ball spacers, steel or brass spacers, or even full complement and caged designs can be supplied for specific applications.

Seals

A land riding NBR (nitrile rubber) seal strip is standard. VITON seals can be supplied to order.

Gearing

The FUN32 Metric series is ungeared

Lubrication

QCB® Slewing rings are assembled with a small quantity of Lithium EP2 grease. It is important that all slewing rings are greased during installation and prior to operation. FUN32 Metric Series slewing rings will usually have 4 or 6 grease nipples DIN 71412 M8x1 on the radial face of each ring. Sufficient grease nipples for all holes as well as Nylon plugs (to insert if a grease nipple is not required) are supplied with each ring.

Special greases can be supplied on demand as can GreaseMax Automatic Lubricators and Accessories.


Load & Bolt limit curves

If both a radial and an axial load act on the bearing these must be combines into a single equivalent load to enable basic selection from the load curves. The raceway limit is illustrated by the blue line, the red line illustrates the limit for the specified number of Grade 8.8 bolts.The load point should be well under the relevant load curve for long life.

Grade 10.9 bolts can be used but only after approval by our technical team.

Similarly if the load is suspended or the axis of rotation is not vertical please refer the application details to us and take advantage of our decades of experience!

QCB referencePDF PrintCAD.dwgMODEL.STP
FUN 1100 32 00 CC LMFUN 1100 32.pdfFUN 1100 32.dwgFUN 1100 32.STP
FUN 1200 32 00 CC LMFUN 1200 32.pdfFUN 1200 32.dwgFUN 1200 32.STP

FUN 1300 32 00 CC LM

FUN 1300 32.pdfFUN 1300 32.dwgFUN 1300 32.STP
FUN 1400 32 00 CC LMFUN 1400 32.pdfFUN 1400 32.dwgFUN 1400 32.STP
FUN 1500 32 00 CC LMFUN 1500 32.pdfFUN 1500 32.dwgFUN 1500 32.STP
FUN 1600 32 00 CC LMFUN 1600 32.pdfFUN 1600 32.dwgFUN 1600 32.STP

Associated Products


LUBRICANTS

Ensure an adequate supply of the correct grease to prolong slewring ring life

Lubricants

GreaseMax Auto Lubricators

TRAILER RINGS

Economical semi-precision turntables of similar diameter.

Heavy Duty Trailer Rings

Do you have a special project?

Need some advice? We can help!


oemsales@nbcgroup.co.uk

01952 222300