FIG 32 Metric Series

A flange profile outer and a geared inner ring separated by a 32 mm ball set; a constant section height of 90 mm and a standard range of external diameters ranging from 1100 mm to 1200 mm

All QCB® slewing rings are manufactured to the highest possible quality levels in ISO certified factories. A QCB® Quality Standard defines all aspects of their dimensions and tolerances as well as all aspects of manufacturing from materials properties, all stages of production, as well as packing and labelling.

Whilst the data on the site is updated regularly, we reserve the right to implement subtle changes to these standards in our quest for continual product improvement.

Applications

Typically used in large conveyor systems or ship loaders where the full strength of a solid section, large diameter slewing ring is unnecessary.

Need help?

Our technical team have many years of experience and are happy to assist with selection. Call or e-mail them for fast, efficient and professional advice.

The Design Form will assist you in defining your application details.

#
QCB ReferenceOutline dimensions & weight
DaBUCDDi

Load

curve

Weight
mmmmmmmmmmmmkg
FIG 1100 32 00 AA LM110010179559558121159
FIG 1200 32 00 AA LM12001117105510559122176
FIG 1300 32 00 AA LM130012171155115510123192
FIG 1400 32 00 AA LM140013171255125511124208
FIG 1500 32 00 AA LM150014171355135512125226
FIG 1600 32 00 AA LM160015171455145513126243
Larger sizes to 2000mm by special offer only
QCB ReferenceOuter holesInner holes20o spur gear
LanaLiniPmzFz MAX
mm mm mm KN
FIG 1100 32 00 AA LM106030894308301083105
FIG 1200 32 00 AA LM116030994309301093105
FIG 1300 32 00 AA LM126036109436103010103105
FIG 1400 32 00 AA LM136042119442113010113105
FIG 1500 32 00 AA LM146042129442123010123105
FIG 1600 32 00 AA LM156048139448133010133105
Larger sizes to 2000mm by special offer only
Standard grease fitting# at least 2-4 x M8 on outer ring

Interchange information

The FIG32 series is interchangeable with bearings from other manufacturers such as Roth Erde, Torriani Gianni, INA, Schaeffler, SKF, RKS, RIMA, La Leonessa and many more. However there may be variations to this rule (e.g. OEM variants) and we invite you to refer to our technical staff for assistance.


FIG 1100 32 00 AAI 1100 32 00 C110/1100.2282.30.0900.013182.30.0955.00.00.10
FIG 1200 32 00 AAI 1200 32 00 C110/1200.2282.30.1000.013182.30.1055.00.00.10
FIG 1300 32 00 AAI 1300 32 00 C110/1300.2282.30.1100.013182.30.1155.00.00.10
FIG 1400 32 00 AAI 1400 32 00 C110/1400.2282.30.1200.013182.30.1255.00.00.10
FIG 1500 32 00 AAI 1500 32 00 C110/1500.2282.30.1300.013182.30.1355.00.00.10
FIG 1600 32 00 AAI 1600 32 00 C110/1600.2282.30.1400.013182.30.1455.00.00.10

Custom designs

  • Double drilled or custom drilling patterns
  • Higher precision bearings with location diameters
  • Reduced internal clearance (Class 5 & Class 6)
  • Black oxide or zinc plating for enhanced corrosion protection
  • Epoxy paint or even Nylon coated units to special order
  • Stainless steel or aluminium versions

Materials

All geared slewing rings are manufactured in 42CrMo4 V steel to offer superior gear strength over some other brands.

Internal construction

Standard FIG32 Series bearings incorporate plastic spacers, but ball spacers, steel or brass spacers, or even full complement and caged designs can be supplied for specific applications.

Seals

A land riding NBR (nitrile rubber) seal strip is standard. VITON seals can be supplied to order.

Gearing

The FIG32 Series has a standard 20° pressure angle, uncorrected spur gear cut into the inner ring.

Lubrication

QCB® Slewing rings are assembled with a small quantity of Lithium EP2 grease. It is important that all slewing rings are greased during installation and prior to operation. FIG32 Series slewing rings will usually have 4 or 6 grease nipples DIN 71412 M8x1 on the radial face of the outer ring. Sufficient grease nipples for all holes as well as Nylon plugs (to insert if a grease nipple is not required) are supplied with each ring.

Special greases can be supplied on demand as can GreaseMax Automatic Lubricators and Accessories.


Load & Bolt limit curves

If both a radial and an axial load act on the bearing these must be combines into a single equivalent load to enable basic selection from the load curves. The raceway limit is illustrated by the blue line, the red line illustrates the limit for the specified number of Grade 10.9 bolts.The load point should be well under the relevant load curve for long life.

Grade 8.8 bolts can be used but only after approval by our technical team.

Similarly if the load is suspended or the axis of rotation is not vertical please refer the application details to us and take advantage of our decades of experience!


#
QCB referencePDF Print
FIG 1100 32 00 CC LMFIG 1100 32.pdf
FIG 1200 32 00 CC LMFIG 1200 32.pdf

FIG 1300 32 00 CC LM

FIG 1300 32.pdf
FIG 1400 32 00 CC LMFIG 1400 32.pdf
FIG 1500 32 00 CC LMFIG 1500 32.pdf
FIG 1600 32 00 CC LMFIG 1600 32.pdf

The 3D models for these bearings are available from 3DContentCentral - search for "QCB FIG"


Associated Products


Do you have a special project?

Need some advice? We can help!


oemsales@nbcgroup.co.uk

01952 222300